Tenda F456 User Manual page 13

Wireless N450 Home Router
3. If Connecting is displayed and no WAN IP address is seen, try refreshing the page five times. And if it still
displays Connecting try steps below:
1). Contact your ISP for assistance.
2). Read the connection diagnostic info on WAN status.
Note
The following diagnostic info will be displayed on particular occasions for your reference:
1). You have connected to Internet successfully.
2). You might have entered a wrong user name and/or a wrong password. Please contact your ISP for the
correct user name and password and enter them again.
3). Ethernet cable is not connected or not properly connected to the WAN port on the device. Please
reconnect it properly.
4). No response is received from your ISP. Please verify that you can access Internet when you directly
connect your PC to an Internet‐enabled modem. If not, contact your local ISP for help.
13