Wireless N450 Home Router
7. Click Status>WAN Status and the connection status displays Connected.
Note
1. When the settings finished, remember to enter Connection Setup to set up Internet connection.
2. Verify that the SSID, channel, and security mode on the page match those of the added wireless network.
If not, manually correct them.
3. For the normal wireless connection between two routers, do not change this router's SSID settings,
including SSID, channel, security mode and security key.
Universal Repeater
In this mode, the router will relay data to an associated root AP and AP function is enabled meanwhile. The
wireless repeater relays signal between its stations and the root AP for greater wireless range. Steps are
shown as below:
1. Click Wireless>Wireless Extender, select Universal Repeater in the extender mode and click Open Scan.
39