Wireless N450 Home Router
WDS
WDS (Wireless Distribution System), this feature can be used to extend your existing 2.4Ghz network
coverage. The details below outline how to configure this feature in the 2.4GHz band.
For example:
As seen in the figure above, PC1 and PC2 access Internet via a wireless connection to Router 1. While PC3
and PC4 are too far to directly connect to Router 1 for Internet access. Now you can use the WDS bridge
feature to let PC3 and PC4 access Internet.
Before you get started:
1. View and note down the wireless security settings: security mode, cipher type, security key, etc. on
Router 1; Click Status>LAN Status and check the IP address.
32