Table of Contents
Advertisement
3) Select the wireless network to connect and click OK.
4) Verify that the SSID, channel, and AP MAC address on the page match those of the added wireless
network. If not, manually correct them.
5) Close Scan and click Save to save your settings.
6) Go to Wireless Security page and set the wireless security settings exactly as they are on the link partner
(Router 1).
7) Go to DHCP Server to disable the DHCP on Router 2. Now you have finished all settings on Router 2
required for WDS.
2. Configure Router 1:
1.
Go to wireless section on Router 1 and specify WDS (or WDS Bridge) as its wireless working mode.
2.
Manually enter Router 2's MAC address (Also, you can use the Open Scan option as mentioned above)
and click Save to finish your settings.
35
Wireless N450 Home Router
Advertisement
Table of Contents
