Mounting Installation; Pin Assignment For Power Input Connector - IBASE Technology SI-61S-AI User Manual

2.1.4

Mounting Installation

Requirements
Before mounting the system, ensure that you have enough room for the power
adaptor and signal cable routing, and have good ventilation for the power
adaptor. The method of mounting must be able to support weight of the
SI-61S-AI plus the weight of the suspending cables attached to the system.
Use the following methods for mounting your system:
Wall Mounting Installation
1. Turn your device upside down. Attach the wall-mount kit to the device and
secure with the supplied 8 screws.
2. Prepare at least 4 screws (M3) to install the device on the wall as shown.
2.1.5

Pin Assignment for Power Input Connector

1 2
Pin Signal
1 Ground
SI-61S-AI User Manual
Pin Signal
2 PWR_SW
2 Motherboard Information
11