Brickcom Fixed Box FB-100A User Manual page 36

6. If the camera supports the EasyLink
displayed. Otherwise, this page will not be shown. *If desired, click <Skip>
to skip this setting.
EasyLink is a unique Brickcom function which allows users to assign a unique domain
TM
name to their network camera's IP address. There is no need to configure the router to
open up ports or remember hard-to-memorize IP addresses.
enabled, users can log onto [uniquedomainname].mybrickcom.com to view the camera's
web GUI and live view.
 Check the option box to enable EasyLink
be between 5-32 characters.
 For Refresh Time, select a desired amount of time from the drop-down menu to
confirm the connection status.
 When finished, click the arrow button to continue.
NOTE: See page 47 for more details about the EasyLink function.
TM
function, the following page will be
. Enter a domain name whose length must
TM
28
When this feature is