Input Signal
1080p
The comparison of a normal WFM/Vector and a Line WFM is as shown
in Figure 5.1-11:
Figure 5.1-11 The LINE WFM and the WFM
You can call out the vectorscope or wave form and configure its display
mode through DISPLAYWAVE FORM TYPE, and configure its display
position through DISPLAY WFM POSITION. Use CONFIGSUB IN
TYPE to switch to PIP mode or PBP mode. Refer to "5.1.7 CONFIG Menu"
for details.
Please refer to the international standard SMPTE2016-1-2007 for the
details about AFD display.
5.1.6 CLOSE CAPTION Menu
The CLOSE CAPTION menu items are used to adjust the parameters
displayed on the screen, the menu items are as shown in Figure 5.1-10:
Default
561
LINE WFM
WFM
Functionality of the Main Menu
Domain Range
42~1121
35