Correction Sewing - Brother S-7000DD Instruction Manual

4-4-2. Correction sewing

When correction sewing is enabled, sewing will be carried out at slow speed (220 sti/min) while the actuator switch is being
pressed when the sewing machine is stopped.
1 Activating setting mode
(While pressing the thread trimming disable/F1 key, turn on the
power switch.)
Selecting "Corr" (correction sewing)
2
(Setting item)
Enabling and disabling correction sewing
3
4
5
4. USING THE OPERATION PANEL (ADVANCED OPERATIONS)
(Press once)
(Setting value)
(Setting item)
(Setting item)
・ When the D
setting is displayed.
・ When the C
previous setting is displayed.
・ When the D
display will appear.
・ When the C
display will appear.
Correction sewing enabled
...
Correction sewing disabled
...
NOTE:
If the SEL key (1) is pressed once more,
the ABCD indicator will switch off and the
display will return to the setting item.
The setting will be stored and the display will
return to the setting item.
Setting mode will be exited and normal
operation will be possible.
S-7000DD
0517D
key is pressed, the next
key is pressed, the
0521D
key is pressed, the "on"
key is pressed, the "oFF"
0518D
0523D
0520D
22