Correction Sewing - Brother T-8422C Instruction Manual

8. USING THE G10 OPERATION PANEL (ADVANCED OPERATIONS)

8-3. Correction sewing

When correction sewing is enabled, sewing will be carried out at slow speed (250 sti/min) while the actuator switch is being
pressed when the sewing machine is stopped.
* This setting cannot be carried out if the lock function is on. (For details on turning the lock function off, refer to "8-7.
Lock function".)
Activating setting mode
1
(While pressing the end backtack key, press the power ON switch.)
Selecting "Corr" (correction sewing)
2
(Press once)
Enabling and disabling correction sewing
3
4
5
43
(Setting item)
(Setting value)
(Setting item)
Setting mode will be exited and normal operation will be possible.
T-8421C, 8422C, 8452C, 8722C, 8752C
(Setting item)
・ When the key is pressed, the "on"
display will appear.
・ When the key is pressed, the "oFF"
display will appear.
Correction sewing enabled
...
Correction sewing disabled
...
NOTE:
If the start backtack key (1) is pressed once
more, the start backtack indicator will switch
off and the display will return to the setting
item.
The setting will be stored and the display will
return to the setting item.
4203M
4210M
4208M 2138M 2139M
4211M
4206M