Table of Contents
Advertisement
1.
Choose Network Setting>Static Route.
2.
Click Add list.
3.
Set the Dest IP address and Subnet mask.
4.
Select an Interface from the drop-down list.
5.
If you select LAN as the interface, you need set a Gateway.
6.
Click Submit. As shown in Figure 3-15.
3.7.2 Modify Static Route
To modify an access restriction rule, perform the following steps:
1.
Choose Security>Static Route.
2.
Choose the item to be modified, and click Edit.
3.
Repeat steps 3 through 5 in the previous procedure.
4.
Click Submit. As shown in Figure 3-16.
Figure 3-15
Figure 3-16
Advertisement
Table of Contents
