Table of Contents
Advertisement
3.2.2.1 Auto Connect LTE Network
To set the CPE automatically connect to the internet, perform the following steps:
1.
Choose Network > LTE Settings;
2.
In the Setting area, set the connect method as Auto, when the LTE network is ready, the CPE
will be connected automaticity. As shown in Figure 3-4.
3.2.2.2 Manual Connect Mobile Network
To set the mobile network manual connect to the internet, perform the following steps:
1.
Choose Network > LTE Settings;
2.
In the Setting area, set the connect method as Manual, when the LTE network is ready, you
can set the CPE connect to the LTE network or disconnect from the LTE network. As shown
in Figure 3-5.
Figure 3-4
Advertisement
Table of Contents
