Table of Contents
Advertisement
2.
Select the user name, if you want to change the password of normal user, you need to set
Enable User enable.
3.
Enter the current password, set a new password ,and confirm the new password.
4.
New password and Confirm password must contain 5 to 15 characters.
5.
Click Submit. As shown in Figure 9-22.
9.14 WEB Setting
To configure the parameters of WEB, perform the following steps:
1.
Choose System> web settings
2.
Set HTTP enable. If you set HTTP disable, you will can't login the web management page
with the HTTP protocol from WAN side.
3.
Set HTTP port. If you want to change the login port, you can set a new port in the box, the
default HTTP port is 80.
4.
Set HTTPS enable. If you want to login the web management page with the HTTPS protocol
from WAN side, you need to enable the HTTPS.
5.
If you want to login the web management page form the WAN, you need to Enable Allowing
login from WAN.
6.
Set the HTTPS port.
7.
Set the Refresh Time.
8.
Set the Session Timeout.
9.
Set the language.
10. Click Submit. As shown in Figure 9-23.
Figure 9-22
Advertisement
Table of Contents
