Deleting Ip Filtering Rule; Url Filtering; Enabling Url Filtering; Disabling Url Filtering - Zte WF820+ User Manual

5.2.7 Deleting IP Filtering rule

To delete an IP address filtering rule, perform the following steps:
1. Choose Security > IP Filtering.
2. Choose the rule to be deleted, and click Delete. As shown in Figure 5-14.

5.3 URL Filtering

Data is filtered by uniform resource locator (URL). This page enables you to configure URL filtering
rules.

5.3.1 Enabling URL Filtering

To enable URL Filtering, perform the following steps:
3. Choose Security>URL Filtering.
4. Set URL Filtering to Enable.
5. As shown in Figure 5-15.
Click Submit.

5.3.2 Disabling URL Filtering

To disable URL Filtering, perform the following steps:
1. Choose Security>URL Filtering.
2. Set URL Filtering to Disable.
3. Click Submit. As shown in Figure 5-16.
Figure 5-14
Figure 5-15