Factory Settings - Redarc BMS1230S2-NA Manual

3 USER GUIDE
3.8

Factory Settings

The Manager30 is shipped with a number of settings already programmed into
the unit. These settings are set to ensure that the charger will safely charge any
battery and may not reflect the actual requirements for your battery type. It is
important to review these settings and adjust as required.
Setting
Battery Type
Capacity
Charge Mode
Key Tone Status
Contrast
Brightness
Backlight Timer
Home Screen Timer
Language
Max Charge Current
Low SOC Alarm
Low Voltage Alarm
Load Disconnect
DC Input Trigger
Modification of the 'Advanced Settings' menu items affect the way The Manager30 unit responds to charging situations.
Modification of these settings may result in the unit not functioning at 100% of its capacity. These settings should only
be modified if absolutely necessary and when the effects of the changes are 100% understood.
34
Factory Value
GEL
40AH
TOURING
ON
50%
90%
30 secs
30 secs
English
30 Amps
10%
10.5 Volts
Off
Auto