Redarc BMS1230S2-NA Manual page 15

2 INSTALLATION GUIDE
Wall Mount
1
Use the template provided (Page 36)
to mark the position and drill and cut
the mounting holes into the wall.
3
Feed the Remote Monitor cable
through the hole and connect it to
the Remote Monitor.
5
Clip the Front Face to the Inner
Assembly.
Figure 2.2.2.2 - How to wall mount the
Remote Monitor.
14
2
Attach the Back Plate to the wall
using 4 suitably sized countersunk
screws.
4
Clip the Inner Assembly into the
Back Plate.
6