Charging Ismp2-Companion - Ingenico IMP4B2 User Manual

4.3.

Charging ISMP2-Companion

•
Before using ISMP2-Companion for the first time, you need to charge it for about 4
hours.
•
After that, you can charge the ISMP2-Companion 3 hours to recharge the battery to
full capacity.
•
Charge the ISMP2-Companion using the USB cable and the power supply (provided
by Ingenico)
CAUTION
Operating the ISMP2-Companion for the first time without the AC adapter, and without
fully charging the backup battery may result in loss of data stored in RAM memory. When
the main battery is removed, the backup battery retains date and time for at least 10
minutes.
A battery indicator is provided on the ISMP2-Companion screen, indicating the charge of
the module.
The ISMP2-Companion can also be charged using the charger provided in the package. The
charger has to be plugged on the micro-USB connector.
•
User Guide
900020417 R11 000 01
16/28
Copyright © 2011 Ingenico
All rights reserved