JUKI LBH-1790AN Instruction Manual page 10

(3) Connecting the power source cord
• Connecting the power cable
Voltage specifications are shown on the power indication tag attached on the power cable and on the
rating plate adhered on the power box. Connect the cable which matches the specifications.
(For example: In the
case of 200V)
Never use under the wrong voltage and phase.
• Connecting three phase 200V, 220V and 240V
White
Table
Control box
Green/Yellow
Black
Black
Red
Power indication tag
White
Green /
Yellow
Plug
Red
Power switch
– 7 –
Rating plate
Power source cord
White
AC200 V
Black
AC220 V
AC240 V
Red
Green /
GND
Yellow