JUKI LBH-1790AN Instruction Manual page 38

5) Changing the name of pattern data.
Select "S500 Pattern data name" and press EDIT
❽ ❻ ❼
key ❽
to enable change of the pattern data
name.
When you press ITEM SELECT key ❻
, the
edit point will move in sequence. The character
placed between "+" and "-" is the edit position
under selection.
Press DATA CHANGE key ❼
while the
character is being selected, the character can be
❸
selected. Press RESET key ❸
to delete
the character which is being selected. When you
The characters that can be used for the
keep RESET key ❸
held pressed for one
pattern name
A - Z, 0 - 9, ., +, -, /, #, (blank)
second, the data name can be deleted.
Change the pattern data name by carrying out the
aforementioned procedure in repetition.
– 35 –