JUKI LBH-1790AN Instruction Manual page 60

(2) Level 2
☆ Press MODE switch for as long as three seconds and it is possible to edit.
No.
Pedal selection
K001
Pedal type is set. → Refer to
2-pedal 1-pedal
(Without intermediate
position)
Function of prohibition of selection of kind of presser
K003
Permitted/Prohibited
Prohibition of change of U014 Kind of presser is set.
Change permitted
Sewing shape selection level
K004
Number of sewing shapes which can be sewn can be increased. (Max.
31 shapes)
12 shapes
K005 Cloth cutting knife power
Output power of cloth cutting knife is set.
0 : Min. power → 3 : Max. power
K006 Selection of machine type
Type of sewing machine head is set.
0 : Standard type 1 : Dry head type
K007 Max. speed limitation speed setting
Max. speed of sewing machine can be limited.
When K006 Selection of machine type is set to dry
head type, max. speed is automatically limited to 3300
sti/min.
Compensation of unsteady needle thread
K008
tension
Output value of needle thread tension is wholly offset
and compensated.
K009 Output time of needle thread tension changed value
When data related to needle thread tension is changed, the changed
value is output as long as the set-up time.
Without output
Function of origin retrieval each time
K010
Origin retrieval is performed after completion of sewing or completion
of cycle.
Without
K011 Needle up by reverse run Permitted/Prohibited
When U001 Presser lifter maximum position is set to 14.0 mm or
more, motion of needle up by reverse run is automatically performed
and the machine stops. Prohibition of the motion can be set.
Needle up by reverse
run prohibited
Item
"V-3. How to use the pedal"
1-pedal 1-pedal
(With intermediate (With a depress on the
position) back part of the pedal)
Change prohibited
20 shapes
Output of set-up time
After end of sewing After end of cycle
Needle up by reverse run
permitted
Setting range
–
p.24.
–
–
31 shapes
0 to 3
0 to 1
400 to 4200
-30 to 30
0 to 20
–
–
– 57 –
Edit unit Initial value
– 1-pedal
(Without
intermediate
position)
– Change
permitted
– 12 shapes
1 3
1 0 (Standard
type)
100 sti/min 3600 sti/min
1 0
1s 0s
– Without
– Permitted