JUKI LBH-1790AN Instruction Manual page 12

(6) Connecting the machine head tilt detector
(7) Installing the hook oil shield plate
❷
(8) Installing the operation panel
❷
❷
Install hook oil shield plate ❶ onto bed base ❸
with setscrew ❷ .
❶
❸
Fix operation panel ❶ on the table with four wood-
screws ❷ . Pass the cable through hole ❸ in the
table.
❶
– 9 –
Connect machine head tilt detector ❶ with
connector ❷ located on the machine head
side.
❶
Attach hook oil shield plate ❶ to the
bed base with the sewing machine
raised.
In addition, check to be sure that the
sewing machine does not interfere
with hook oil shield plate ❶ when
tilting/raising the former.
Adjust the mounting of the hook oil
shield plate ❶ to prevent scattered
from the gap between the bed and
cover pot.
❸