JUKI LBH-1790AN Instruction Manual page 44

No.
ACT timing adjustment at the start of right
S060
overedging
This item adjusts needle thread tension output start
timing at right overedging section.
S061 ACT timing adjustment at the start of 2nd
bar-tacking
This item adjusts needle thread tension output start
timing at 2nd bar-tacking section.
S062 Number of stitches of tie stitching at the
start of sewing
This item sets number of stitches of tie stitching at
the start of sewing.
Sewing pitch of tie stitching at the start of
S063
sewing
This item sets sewing pitch pf tie stitching at the
start of sewing.
S064 Tie stitching width at the start of sewing
This item sets tie stitching width at the start of sew-
ing.
Lengthwise compensation of tie stitching
S065
at the start of sewing
This item sets start position of tie stitching in length-
wise direction at the start of sewing.
S066 Crosswise compensation of tie stitching at
the start of sewing
This item sets start position of tie stitching in cross-
wise direction at the start of sewing.
S067 Tie stitching width at the end of sewing
This item sets tie stitching width at the end of sew-
ing.
Number of stitches of tie stitching at the
S068
end of sewing
This item sets number of stitches of tie stitching at
the end of sewing.
S069 Lengthwise compensation of tie stitching
at the end of sewing
This item sets start position of tie stitching in length-
wise direction at the end of sewing.
S070 Crosswise compensation of tie stitching at
the end of sewing
This item sets start position of tie stitching in cross-
wise direction at the end of sewing.
Knife motion
S081
This item sets "With/without motion" of normal cloth cutting knife.
: Normal knife
motion OFF
Knife motion at 1st cycle of double stitching
S083
This item sets "With/without motion" of cloth cutting knife at 1st
cycle when double stitching is performed.
: Normal knife
motion OFF
*1 : Displayed according to the shape
*2 : Displayed when it is set to with edit. Refer to
*3 : Displayed when the function is selected.
Item
: Normal knife
motion ON
: Normal knife
motion ON
"V-12. Method of setting sewing data with/without edit"
– 41 –
Setting range Edit unit
-5 to 5 1 stitch
-5 to 5 1 stitch
0 to 8 1 stitch
0.00 to 0.70 0.05 mm
0.0 to 3.0 0.1 mm
0.0 to 5.0 0.1 mm
0.0 to 2.0 0.1 mm
0.1 to 1.5 0.1 mm
0 to 8 1
0.0 to 5.0 0.1 mm
0.0 to 3.0 0.1 mm
– –
– –
Remarks
*2
*2
–
*2
–
*2
*2
–
–
*2
*2
–
*2, *3
p.36.