Cpu Thermal Grease Pad - Advantech ARK-3500 User Manual

3. Unscrew 1 screw on card bracket.
4. Repeat step3 if needed.
5. Unscrew 2 screws on the board.
6. Install the PCI or PCIe device on the board and screw on the bracket.
7. Screw the board back.
8. Screw the bracket back.
9. Screw the bottom side back.
2.5.6

CPU thermal Grease Pad

CPU thermal grease pad is one of the key components of ARK-3500 thermal design.
Always use the grease pad provided by Advantech. The P/N of the grease pad is:
Part Number Description
1990020828N001 Thermal-Pad D27*0.25 K=3 TP HW-PCM45Fφ27*0.25
To ensure the best thermal performance, it is recommended to replace the thermal
grease for CPU thermal pole each time the top cover is opened.
1. To replace the thermal grease, clean up the CPU thermal pole by using paper
tissue or soft cloth. DO NOT USE any kind of solvent to clean the thermal pole
as this may damage the thermal grease inside the thermal pole.
2. Gently remove one of the protective papers on the grease pad and apply the
grease to the CPU thermal pole. Press onto the grease pad for 30 seconds,
then remove the protective paper gently from the grease pad.
31 ARK-3500 User Manual