External Connection; How To Connect The Connectors; Connector Shape - Contec DIO-32DM2-PE User Manual

3. External Connection

This chapter describes the interface connectors on the product and the external I/O circuits.
Check the information available here when connecting an external device.

How to connect the connectors

Connector shape

To connect an external device to this product, plug the cable from the device into the interface
connector (CN1) shown below.
Interface connector (CN1)
* Please refer to chapter 1 for more information on the supported cable and accessories.
Figure 3.1. Interface Connector and Applicable Cable Connector
DIO-32DM2-PE
B48
A48 - Connector used
B47
A47
- Compatible connectors
B02 A02
B01
A01
3. External Connection
PCR-E96LMD+
[mfd. by HONDA TSUSHIN
KOGYO CO., LTD.]
or equivalence to it
PCR-E96FA+
[mfd. by HONDA TSUSHIN
KOGYO CO., LTD.]
or equivalence to it
27