Auto-Off Timer Setting - Fujitsu ARTG30LHTDP Operating Manual

When you return to the "Monitor" screen, the icon is displayed.
To check the function, press the [Enter button] and select the
icon with the [Cursor button (Left/Right)].
Monitor
Weekly timer : Weekly 1
Cool
Menu
z 4-2-4. Auto-off timer setting
1
In "Timer" screen, select [Auto-off timer] with the [Cursor
button (Up/Down)], and press the [Enter button].
Timer
On timer
Off timer
Weekly timer
Auto-off timer
Back:
Function
2
"Auto-off timer" screen is displayed.
Auto-off timer
Enable/Disable setting
Stop in
Valid hour
Back:
Weekly timer
To change the setting, select the item with the [Cursor
button (Up/Down)], and press the [Enter button].
3
For [Enable/Disable setting], select [Enable] or [Disable]
with the [Cursor button (Up/Down)], and press the [Enter
button] to complete the setting.
Auto-off timer
Enable/Disable setting
Stop in
Valid hour
Cancel:
Weekly timer
9381067145_OM_EN.indd 20
Mo 10:00
26
° C
High
End:
Zone ( single )
Mo 10:00
Disable
Disable
Disable
Disable
Setting:
Mo 10:00
Disable
30min.
Start End
0:00 0:00
Setting:
On timer
Mo 10:00
Enable
30min.
Start End
0:00 0:00
OK:
On timer
4
For [Stop in], adjust the timer with the [Cursor button (Up/
Down)]. To complete the setting, press the [Enter button].
Auto-off timer
Enable/Disable setting
Stop in
Valid hour
Cancel: OK:
Weekly timer
NOTE
• The set time can be set from 30 to 240 minutes in units of
10 minutes.
5
For [Valid hour], applicable time slot for the Auto-off
timer can be set.
Set the time with the [Cursor button (Up/Down)], and
press the [Enter button].
Auto-off timer
Enable/Disable setting
Stop in
Valid hour
Cancel: OK:
Weekly timer
NOTES
• Counting down of the Auto-off timer is valid only if the
air conditioning operation has been started with the [On/
Off button] of this remote controller. When Auto-off timer
become active, following message is displayed on the
screen.
Auto-off timer start
Menu
• Even if the valid hour is ended during Auto-off timer is
working, the function will work after the set time in [Stop in]
elapsed.
• The timer started counting down within the valid hour of the
function, even if the current time is being out of the valid
hour during the counting down, the function works.
• If the air conditioning operation is On by Weekly timer after
counting down of Auto-off timer has started, the Auto-off
timer will not work.
Mo 10:00
Enable
120 min.
Start End
0:00 0:00
On timer
Mo 10:00
Enable
120 min.
Start End
6 00 0:00
On timer
En-20
14/09/2015 13:48:04