Set Temp. Range Limitation Setting - Fujitsu ARTG30LHTDP Operating Manual

4
For [Return time and temp. setting], select operation
mode with the [Cursor button (Up/Down)], and press the
[Enter button]. Adjust the value with the [Cursor button
(Up/Down)].
With the [Cursor button (Left/Right)], the cursor can be
switched [Time] and [Temp].
Set temp. auto return
Enable/Disable setting
Return time and temp. setting
Cool/Dry
Heat
Cancel:
Air flow dire...
To complete the setting, press the [Enter button]. To re-
turn to the "Function" screen, press the [Cancel button].
NOTES
• The set time can be set from 30 to 120 minutes in units of
10 minutes.
• Possible temperature setting ranges in the operation mode
are as follows:
Cool, Dry .......................... 18 to 30 °C (64 to 88 °F)
Heat .................................. 16 to 30 °C (60 to 88 °F)
• If any ranges have been set in [Set temp. range] setting,
adjustable temperature range in this setting follows the
restricted range.
• If you set any ranges in the [Set temp. range] setting after
setting of [Set temp. auto return], the restricted range set in
the [Set temp. range] also overrides [Set temp. auto return]
setting.
• Even if the temperature setting change is done on the
secondary remote controller, it returns to the set value in [Set
temp. auto return] on the primary remote controller.
When you return to the "Monitor" screen, the icon is displayed.
To check the function, press the [Enter button] and select the
icon with the [Cursor button (Left/Right)].
Monitor
Set temp. auto return: Remaining 30 minutes
Cool
Menu
En-11
9381067145_OM_EN.indd 11
Mo 10:00
Enable
Time / Temp.
30min. 26
° C
30min. 26
° C
OK:
Set temp. range
Mo 10:00
24
° C
High
End:
z 3-2-3. Set temp. range limitation setting
1
In "Function" screen, select [Set temp. range] with the
[Cursor button (Up/Down)].
Function
Air flow direction
Economy
Set temp. auto return
Set temp. range
Back: Setting:
To change the setting, press the [Enter button].
2
"Set temp. range" screen is displayed.
Set temp. range
Enable/Disable setting
Temp. setting
Cool/Dry
Heat
Auto
Back: Setting:
Set temp. au...
Select the item with the [Cursor button (Up/Down)], and
press the [Enter button].
3
For [Enable/Disable setting], select [Enable] or [Disable]
with the [Cursor button (Up/Down)], and press the [Enter
button] to complete the setting.
Set temp. range
Enable/Disable setting
Temp. setting
Cool/Dry
Heat
Auto
Cancel:
OK:
Set temp. au...
4
For [Temp. setting], select mode with the [Cursor button
(Up/Down)] and press the [Enter button].
Adjust [Lower] and [Upper] value with the [Cursor button
(Up/Down)].
With the [Cursor button (Left/Right)], the cursor can be
switched [Lower] and [Upper].
To complete the setting, press the [Enter button].
Set temp. range
Enable/Disable setting
Temp. setting
Cool/Dry
Heat
Auto
Cancel: OK:
Set temp. au...
Mo 10:00
Off
Disable
Disable
Timer
Mo 10:00
Disable
Lower Upper
18 30
° C ° C
16 30
° C ° C
18 30
° C ° C
Air flow dire...
Mo 10:00
Enable
Lower
Upper
18 30
° C ° C
16 30
° C ° C
18 30
° C ° C
Air flow dire...
Mo 10:00
Enable
Lower Upper
30
18
° C ° C
16 30
° C ° C
18 30
° C ° C
Air flow dire...
14/09/2015 13:48:02