Fujitsu ARTG30LHTDP Operating Manual page 17

(5) When you selected [On] (On timer), select the operating
mode with the [Cursor button (Up/Down)].
Weekly timer setting
Su Mo
Weekly 1
Day 1
2
Time
3
End
4
Cancel:
(6) When you selected [On] (On timer), adjust the value to
the desired temperature with the [Cursor button (Up/
Down)].
Weekly timer setting
Su Mo
Weekly 1
Day
1
2
Time
3
End
4
Cancel:
NOTES
• When you set "On timer", you need to set both of the
operating mode and the temperature firmly.
Without these configurations, the timer will not work.
• Possible temperature setting ranges in the operation mode
are as follows:
Cool, Dry, Auto ................ 18 to 30 °C (64 to 88 °F)
Heat ................................. 16 to 30 °C (60 to 88 °F)
• If the temperature out of the Set temp. range limitation is
set, it will be reset at the nearest temperature within the
range. However, the adjusted temperature value in this
setting will not be corrected automatically.
(7) To complete the [Time] setting, press the [Enter button].
When setting the other days of the week continually,
perform procedures in step 4 and 5.
6. T o finalize the setting you have set in step 5, select [End]
with the [Cursor button (Up/Down)] and press the [Enter
button].
Weekly timer setting
Su Mo
Weekly 1
Day 1
10:00
2
Time
17:00
3
End
4
Back:
9381067145_OM_EN.indd 16
Mo 10:00
5:00 On Heat
° C
OK:
Time 5-8
Mo 10:00
5:00 20
On Heat
° C
OK:
Time 5-8
Mo 10:00
5:00 On Heat 20
° C
Off
On Heat 23
° C
Setting:
Time 5-8
If you press the [Cancel button] before you finalize the set-
ting, following cancel confirmation screen is displayed.
Setting change will be canceled. OK?
No
Select [No] or [Yes] with the [Cursor button (Left/Right)], and
press the [Enter button].
If you select [Yes] and press the [Enter button] here, all the
configured items in step 5 will be canceled.
If you select [No] and press the [Enter button] here, the
"Weekly timer setting" screen is displayed. To finalize the
setting, select [End] with the [Cursor button (Up/Down)] and
press the [Enter button].
NOTE
• When the "Weekly timer setting" screen is displayed
again after finalizing the setting, the set patterns you have
registered will be sorted in time order. (Sorting function)
When you return to the "Monitor" screen, the icon is displayed.
To check the function, press the [Enter button] and select the
icon with the [Cursor button (Left/Right)].
Monitor
Weekly timer : Weekly 1
26
Cool
End:
Menu
Weekly timer setting (with zone control):
In "Weekly timer setting" screen, you can setup the schedule
for each of [Weekly 1] and [Weekly 2].
1. Select [Weekly timer setting] with the [Cursor button (Up/
Down)], and press the [Enter button].
Weekly timer
Weekly timer select
Day off
Su Mo Tu We
Weekly timer setting
Setting:
Back:
Off timer
Yes
Mo 10:00
° C
High
Mo 10:00
Weekly 1
Th Fr Sa
Auto-off timer
En-16
14/09/2015 13:48:03