Lenovo ThinkSystem SR630 V2 Reference page 11

Hide thumbs Also See for ThinkSystem SR630 V2:
Table of Contents

Advertisement

Table 2. Events organized by severity (continued)
Message String
Event ID
FQXSPEM0009I
The System [ComputerSystemElementName] has generated an
auxiliary Log Entry in Log [RecordLogElement].
FQXSPEM4000I
The [arg1] on system [arg2] cleared by user [arg3].
FQXSPEM4001I
The [arg1] on system [arg2] is 75% full.
FQXSPEM4002I
The [arg1] on system [arg2] is 100% full.
FQXSPEM4003I
LED [arg1] state changed to [arg2] by [arg3].
FQXSPEM4004I
SNMP [arg1] enabled by user [arg2] .
FQXSPEM4005I
SNMP [arg1] disabled by user [arg2] .
FQXSPEM4006I
Alert Configuration Global Event Notification set by user [arg1]:
RetryLimit=[arg2], RetryInterval=[arg3], EntryInterval=[arg4].
FQXSPEM4007I
Alert Recipient Number [arg1] updated: Name=[arg2],
DeliveryMethod=[arg3], Address=[arg4], IncludeLog=[arg5], Enabled=
[arg6], EnabledAlerts=[arg7], AllowedFilters=[arg8] by user [arg9] from
[arg10] at IP address [arg11].
FQXSPEM4008I
SNMP Traps enabled by user [arg1]: EnabledAlerts=[arg2],
AllowedFilters=[arg3] .
FQXSPEM4009I
The UEFI Definitions have been changed.
FQXSPEM4010I
UEFI Reported: [arg1].
FQXSPEM4011I
XCC failed to log previous event [arg1].
FQXSPEM4012I
User [arg1] made system [arg2] Encapsulation lite Mode.
FQXSPEM4013I
Battery error was detected by RAID controller. The battery unit needs
replacement.([arg1],[arg2],[arg3],[arg4],[arg5])
FQXSPEM4014I
The RAID controller has problem with the battery. Please contact
technical support to resolve this issue.([arg1],[arg2],[arg3],[arg4],
[arg5])
FQXSPEM4015I
The RAID controller detected unrecoverable error. The controller
needs replacement.([arg1],[arg2],[arg3],[arg4],[arg5])
FQXSPEM4016I
The RAID controller detected one or more problems. Please contact
technical support for additional assistance.([arg1],[arg2],[arg3],[arg4],
[arg5])
FQXSPEM4017I
The RAID controller detected one or more possible configuration
changes within the subsystem. Please check the drive LED status. If
necessary, contact technical support for additional assistance.([arg1],
[arg2],[arg3],[arg4],[arg5])
FQXSPEM4018I
Enclosure/Chassis issue detected with one or more units. Please
check the enclosure/chassis units to repair the problem.([arg1],[arg2],
[arg3],[arg4],[arg5])
FQXSPEM4019I
Connectivity issue detected with the enclosure/chassis. Please check
your cable configurations to repair the problem.([arg1],[arg2],[arg3],
[arg4],[arg5])
FQXSPEM4020I
Fan problem detected with the enclosure/chassis. Please check the
enclosure/chassis unit fan for correct operation.([arg1],[arg2],[arg3],
[arg4],[arg5])
Severity
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
Informational
.
Chapter 2
XClarity Controller events
7

Advertisement

Table of Contents
loading

This manual is also suitable for:

7z707z71

Table of Contents