Attaching The Exhaust Hood - privileg SY-103E9G-P1-C13-L22-600 User Manual

Attaching the Exhaust hood

(5)
Stifte
1. Place the two halves of the check
valve (5) into the opening on the top of
the Exhaust hood (1).
Make sure that the pins on the valve are
facing outwards.
2. Screw the two round-head screws (11) for
hanging the Exhaust hood into the wall
plugs.
There must be enough space between
the wall and the heads of the screws so
that the Exhaust hood can be hung by the
keyhole openings.
(15)
3. Flip the cover (13) up.
Materials required for assembly
4. Open the locks (14) on the grease fil-
ter (15) and carefully remove the grease
filter.
(5)
(11)
5. Carefully hang the Exhaust hood on the
two round-head screws (11) using the
keyhole openings.
6. If necessary, remove the Exhaust hood
again to loosen or tighten the screws in
order to ensure that the hood is flush with
the wall.
(12)
(13)
7. Turn two round-head screws (12) into the
prepared dowels to secure the exhaust
(14)
hood, and screw the exhaust hood tightly
to the wall.
Page GB-13
(11)
2x
(12)