Attaching The Exhaust Air Hose; Installing The Flue Screen - privileg SY-103E9G-P1-C13-L22-600 User Manual

Page GB-14 Materials required for assembly
8. Place the grease filter (15) with the pins
into the openings.
9. Push the lock (14) to the side; snap the
grease filter (15) shut and release the
lock again.
10. Close the cover (13) again and allow it to
click into place.
The exhaust hood is now mounted to the
wall.
Attaching the exhaust air
hose
(13)
The exhaust air hose (4) must be installed
if you intend to use the exhaust hood with
exhaust air operation.
(4)
(14)
(15)
1. Insert the end of the exhaust hose (4)
with the larger diameter (153 mm) into the
connection with the check valve.
2. Secure the lower end of the exhaust hose
with the cable tie (9).

Installing the flue screen

(6)
1. Screw the wall bracket for the upper flue
screen (6) into the prepared dowels using
2 round-head screws (10).
2. Push the upper part (2) of the flue screen
halfway into the lower part (3) of the flue
screen.
(9)
(2)
(3)