Changing The Super Administrator Login; Moving On - Tripp Lite B064-016-02-IP Owner's Manual

Super Administrator Setup
NIC Settings
AP Windows Client
For computers running Windows, the B064-Series KVM Switch's IP
address can be determined using the AP Windows Client that comes
on the B064-Series KVM Switch CD. When you run the program it
searches the network segment for B064-Series KVM Switch devices,
and displays the results in a dialog box similar to the one below:

Changing the Super Administrator Login

To change the default Super Administrator Username and Password,
do the following:
1. At the top of the Web page, click User Management.
The User Management page has a list of Users and Groups in the left
hand panel, and a more detailed list of users in a large central panel.
Since this is the first time the page is being accessed, only the Super
Administrator appears:

Moving On

After setting up the network and changing the default Super Administrator username and password, you can proceed to other administration
activities. These include User Management, Device Management, and Firmware Upgrade Maintenance.
You can use the network address found here to access the B064-Series
KVM Switch. Once you login to the KVM switch, you can change
the IP Address using the instructions in the Local Server and Browser
sections of this chapter.
2. Click Administrator in the left panel; or, select Administrator in the
central panel and click the Modify button at the bottom of the page.
The User Information page appears:
3. Change the Username and Password to something unique.
4. Re-enter the password to confirm it is correct.
5. Click Save.
6. When the dialog box informing you that the change completed
successfully appears, click OK.
7. Click on an item in the left-hand panel to close the User Information
page.
14