The On-Screen Keyboard; Mouse Pointer Type; Mouse Sync Mode; Manual Mouse Synchronization - Tripp Lite B064-016-02-IP Owner's Manual

The OSD Main Page

The On-Screen Keyboard

The B064-Series KVM Switch supports an on-screen keyboard,
available in multiple languages, with all the standard keys for each
supported language. Click this icon to display the on-screen keyboard:
To change languages, click the drop-down arrow on the on-screen
keyboard next to the currently selected language and select the new
language:

Mouse Pointer Type

The B064-Series KVM Switch offers a number of mouse pointer
options when working in the remote display. Click this icon to select
from the available choices:

Mouse Sync Mode

Click to toggle between Automatic and Manual mouse sync.
• When Automatic mouse sync is selected, a green
• When Manual mouse sync is selected, a red
Note: The Automatic feature only supports USB mice on Windows and Mac (G4 or higher) systems. This icon only becomes active when
you are connected to a port that has an online computer matching those requirements; if not, the icon is inactive and only Manual mouse
synchronization will be available.

Manual Mouse Synchronization

If the local mouse pointer goes out of sync with the remote system's mouse pointer, there are a number of methods to bring them back into sync:
Before trying any mouse synchronization procedures, it is always a good idea to ensure that you go to your Mouse Properties Settings and set
them according to the instructions that follow. The Mouse Properties Settings should be set on the computers attached to the B064-Series KVM
Switch, not the computer you are using to access it.
Clicking the arrow to the right of the language list will display/hide
the expanded keyboard keys:
• Dual Mouse Pointers – Select this option to display both local and
remote mouse pointers as arrows.
• Crosshairs Mouse Pointers – Select this option to display the local
mouse pointer as a cross and the remote mouse pointer as an arrow.
• Single Mouse Pointer – Select this option to display the remote
mouse pointer only. The remote mouse pointer will display as an
arrow.
Note: The icon on the Control Panel changes to match your choice.
appears on the icon.
4
X
appears on the icon.
23