Tripp Lite B064-016-02-IP Owner's Manual page 7

Introduction
Components
(continued)
Rear View
1 2 3
5 4 6
No . Component
Power Socket
1
Power Switch
2
Secondary LAN Port
3
(LAN 2)
Primary LAN Port
4
(LAN 1)
Grounding Terminal
5
Modem Port
6
Local Console Port
7
Server Ports
8
Note: The figure above shows the rear panel of a B064-032-04-IP or B064-032-02-IP. The B064-016-04-IP and B064-016-02-IP differ in that
it only has a single block of 16 KVM ports.
7
Description
The included power cord connects here.
Press to turn the KVM switch On/Off.
The cable that connects the KVM switch to the backup network plugs in here.
The cable that connects the KVM switch to the primary network plugs in here.
Connect the included grounding wire to this terminal to ground the KVM switch.
An optional dial-in connection is available for use in the event the KVM switch is not available over the Primary
or Secondary networks.
The included USB – PS/2 Console Cable Kit plugs in here. You can connect a local console with either a USB or
PS/2 Keyboard and Mouse.
Cat5e/6 cable connects between these ports and the SIUs to connect computer/servers to the KVM switch.
8
7