Tripp Lite B064-016-02-IP Owner's Manual page 50

Device Management
Extend and Update the Active Directory Schema
d) Right-click on the user's name and select Properties .
e) On the Attribute Editor page of the dialog box that appears, select
Permission from the list.
Character Meaning
C Grants the user administrator privileges, allowing the user to configure the system.
W Allows the user to access the system via the Windows Client program.
J Allows the user to access the system via the Java applet.
L Allows the user to access log information via the user's browser.
V Limits the user's access to only viewing the video display.
Access rights examples are given in the table below:
User Value
User1 10.0.0.166&w,v
User2 10.0.0.166&j,c
User3 v,l;10.0.0.164&j
User4
User5 v,w
User6 v;10.0.0.166&;
10.0.0.164&c,
(continued)
Meaning
1. User has Windows Client and View Only rights on a B064-Series KVM Switch with an IP address
of 10.0.0.166.
2. User has no rights on any other B064-Series KVM Switch units administered by the LDAP server.
1. User has Java Applet and Administrator rights on a B064-Series KVM Switch with an IP address
of 10.0.0.166.
2. User has no rights on any other B064-Series KVM Switch units administered by the LDAP server.
1. User has View Only and Log Information rights on all B064-Series KVM Switch units administered
by the LDAP server.
2. User has Java Applet rights on a B064-Series KVM Switch with an IP address of 10.0.0.164.
User has no access rights to any B064-Series KVM Switch units administered by the LDAP server.
User has View Only and Windows Client rights on all B064-Series KVM Switch units administered by the
LDAP server.
1. User has View Only rights on all B064-Series KVM Switch units administered by the LDAP server,
except for the ones with IP addresses of 10.0.0.166 and 10.0.0.164.
2. User has no access rights on the B064-Series KVM switch with an IP address of 10.0.0.166.
3. User has Administrator and Java Applet rights on the B064-Series KVM Switch with an IP address
of 10.0.0.164.
50
f) Click Edit to bring up the String Attribute Editor:
g) Replace the value shown with the desired B064-Series KVM
Switch permission attribute value. (See below for details)
The Permission Attribute Value is made up of two parts; the IP
address of the B064-Series KVM Switch a user will access and a
string that indicates the access rights the user has on the B064-Series
KVM Switch at that IP address. The following rules apply to the
makeup of the permission attribute value entry:
• An ampersand (&) connects the B064-Series KVM Switch's IP
address with the access rights string.
• The access rights string is made up of various combinations of the
following characters: c w j p l v s. The characters can be entered in
upper or lower case. The meaning of the characters is provided in
the Permission String Characters table, below.
• The characters in the access rights string are separated by a comma
(,). There are no spaces before or after the comma.
• If a user has access rights to more than one B064-Series KVM
Switch, each permission segment is separated by a semicolon (;).
There are no spaces before or after the semicolon.