Table of Contents
Advertisement
5. Installation
5.7.3 Browser/Non-Browser Client
By default, the KVM switch is set to have an IP address assigned
automatically via DHCP server. If this is the case, you will need to
obtain the IP address from your network administrator. If connected to
a network without a DHCP server, it boots with a default IP address.
The default IPv4 and IPv6 addresses can be found on the sticker on
the bottom of the unit.
1. Enter the unit's IP address into your web browser.
2. You may be prompted by a screen stating that there is a problem
with this website's security certificate. Click on the option to
continue to the website anyway. (See Web Browser Login section
for details on installing the security certificate)
3. You will be brought to a login page. Enter the default Username
(administrator), and the default Password (password). The Web
Management Interface will open upon entering the Username
and Password. It is strongly recommended that you change these
to a unique Username and Password (see Changing the Super
Administrator Login section for instructions).
4. Click on the Device Managment icon at the top of the page, then
click Network in the subsections to open the Network settings
page.
5.7.4 Changing the Super Administrator Login
To change the default Super Administrator Username and Password,
do the following:
1. At the top of the OSD page, click User Management.
Since this is the first time the page is being accessed, only the
Super Administrator appears:
2. Click Administrator in the left panel; or, select Administrator in the
central panel and click the Modify button at the bottom of the
page.
( continued )
5. By default, the Obtain IP address automatically [DHCP] checkbox
is checked. To set a fixed IP address, check the Set IP address
manually [Fixed IP] check box in the IPv4 or IPv6 settings section,
depending on your network.
6. The IP Address, Subnet Mask and Default Gateway fields will be
activated upon checking the Set IP address manually [Fixed IP]
checkbox. Fill in these fields with information appropriate for your
network.
7. As with the IP Address settings, the DNS Server settings can be
obtained automatically or assigned manually. To manually enter
these settings, check the Set DNS server address manually
checkbox and fill in the Preferred DNS server and Alternate DNS
server fields with information appropriate for your network.
Note: The Alternate DNS server field is optional.
8. When you have entered the IP Address and DNS Server settings,
click the Save button. When you log out, the unit will be reset and
your network changes will be applied.
See section 7.3.2 Network in this manual for complete information on
the rest of the settings on this page.
The User Information page appears:
3. Change the Username and Password to something unique.
4. Re-enter the password to confirm it is correct.
5. Click Save.
6. When the dialog box informing you that the change completed
successfully appears, click OK.
11
Advertisement
Table of Contents
