NEC Express5800/R320a-E4 User Manual page 100

4-50 Windows Setup
Follow the steps below to update the system.
14.
IMPORTANT:
Do not input or output data during the update process.
Do not input or output data during the update process.
a) After logging on to the system as a user with the Administrative account, insert NEC
EXPRESSBUILDER DVD into the drive of the server.
b) When the "Autorun Menu" screen appears, click [Setup Windows] and click [Update the
system] on the menu.
1. When the dialog box for confirmation of executing system update appears, click [OK].
The system update will start. Follow the instructions.
2． After the system update is completed, the dialog box below will be displayed. Click
[OK]. The system will be rebooted. Eject a DVD from CD/DVD-ROM drive after the
reboot process starts.
IMPORTANT:
When "Found New Hardware" wizard appears at the reboot, click [Cancel].
If the same message appears again, click [Cancel] again.
3． Reboot the system.
4. After the reboot, login as Administrator.