Adding Dishes; Button Lock / Child Lock - Hanseatic WQP12-T7735E User Manual

5. Select any additional options required as
described on the previous pages.
6. Start the programme.

Adding dishes

CAUTION!
Risk of scalding!
If you open the dishwasher door, hot
steam will come out.
Keep a suffi cient distance to the door
■
and do not hold your body or upper
body directly above the opened door.
Keep children and pets away from the
■
appliance when opening the door.
Make sure that children do not open
■
the door during operation.
You can add more dishes even if the dish-
washer programme is already running.
In this case, the current dishwashing pro-
gramme should only have been running for
a short time, as only then can the additional
dishes be cleaned.
1. Press the button (11) in order to inter-
rupt the dishwashing programme.
The LED to the right of the programme
symbol will become a solid light.
2. Open the dishwasher door slightly and
wait until the spraying arm has come to a
standstill and the steam has dispersed.
3. Slowly open the door all the way.
4. Add the dishes.
5. Close the door.
Dishwasher operation
6. Press the button once again
After approximately 10 seconds of inactiv-
ity, the appliance will continue.
A signal tone will sound at regular
intervals while the wash programme is
paused.

Button lock / child lock

(4)
The dishwasher buttons can be locked, e.g.
for childproofing purposes.
• To switch the button lock
– on, press the plus and minus button
(12) and hold them pressed in until the
lock symbol (4) appears in the display.
The buttons are locked.
– off, press both buttons again and hold in
until the lock symbol in the display goes
out. The buttons are unlocked.
(11)
Page EN-21
(11).
(12)
/