4. Store the instrument in a cool, dry environment. Cover the microscope with the dust cover when not in use. 5. ACCU-SCOPE microscopes are precision instruments which require periodic servicing to maintain proper performance and to compensate for normal wear. A regular schedule of preventative maintenance by qualified service personnel is highly recommended.
3075-GS ZOOM STEREO MICROSCOPE ON GEM STAND INTRODUCTION Congratulations on the purchase of your new ACCU-SCOPE microscope. ACCU-SCOPE microscopes are engineered and manufactured to the highest quality standards. Your microscope will last a lifetime if used and maintained properly. ACCU-SCOPE microscopes are carefully assembled, inspected and tested by our staff of trained technicians in our New York facility.
When assembling the Microscope, make sure that all parts are free of dust and dirt, and avoid scratching any parts or touching glass surfaces. Stereo Head Eyepieces Lock Screw Fluorescent Illuminator Gem Clamp Power Cord 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com ACCU-SCOPE...
Page 6
Installing the Stoneholder (Fig. 2) The stage has two stoneholder mounts on either side of the stage where you can attach the Fig. 1 stoneholder Fig. 2 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com ACCU-SCOPE...
Page 7
The LED light may be varied in intensity by adjusting the intensity dial labeled “Reflected” on the side of the Gemstand. Fig. 3A 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com ACCU-SCOPE...
eyetubes of the viewing head and adjust the eyetubes by opening or closing them until the left and right fields of view coincide completely and you are able to see a complete circle. Fig. 6 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com ACCU-SCOPE...
Page 9
Plug the GEM base into a 110v power supply outlet. Turn the main switch to the “I” (on) position, and rotate the brightness adjustment knob to obtain a comfortable brightness. Fig. 8 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com ACCU-SCOPE...
Page 10
By turning the main switch to “I” (on) and the fluorescent lamp switch to “I” (on), the top illuminator will provide the equivalent of a Fig. 10 northern daylight overhead light source. 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com ACCU-SCOPE...
To insert the new lamp wrap the plastic bag supplied with the lamp or a piece of lens tissue around the lamp before handling/inserting it. Fig. 11 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com ACCU-SCOPE...
Page 12
Once the lamp housing is reassembled, reattach the overhead fluorescent light to the stage of the GEM stand base (see page 8). Fig. 12 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com ACCU-SCOPE...
Voltage from power supply is too Use the brightness adjustment high knob to lower brightness Light flickers Bulb needs replacement Replace bulb Bulb may be loose in socket Remove bulb and reinsert securely 73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com ACCU-SCOPE...
SCOPE at (631) 864-1000. This warranty is limited to the continental United States of America. All items returned for warranty repair must be sent freight prepaid and insured to ACCU-SCOPE INC., 73 Mall Drive, Commack, NY 11725 – USA. All warranty repairs will be returned freight prepaid to any destination within the continental United States of America, for all foreign warranty repairs return freight charges are the responsibility of the individual/company who returned the merchandise for repair.