Advertisement
Quick Links
Advertisement
Related Manuals for Accu-Scope 3088F
Summary of Contents for Accu-Scope 3088F
- Page 2 Eyepiece Cord Hanger Viewing Head Nosepiece Objective Stage Clips Coarse Adjustment Stage Knob Disc or Iris Diaphragm (beneath stage) Fine Focus Knob lluminator 3088F MICROSCOPE SERIES...
-
Page 3: Operation
Each ACCU-SCOPE 3088F microscope is supplied with either a disc or iris diaphragm, depending on the model ordered. The amount of light can be adjusted by opening or closing the iris diaphragm or by turning the disc diaphragm. -
Page 4: Maintenance
Reattach the bottom plate with the two thumbscrews. Never operate the microscope unless the bottom plate is secured properly. Return the microscope to the upright position. Replacement bulbs – The 3088F microscope uses Catalog No. 3368, 5 watt fluorescent bulb. Replacement bulbs and other parts and accessories are available from your authorized ACCU-SCOPE dealer. -
Page 5: Troubleshooting Guide
TROUBLESHOOTING GUIDE If a problem occurs during the course of use, please refer to the tables below before contacting your ACCU-SCOPE distributor. OPTICAL Problem Cause Corrective Measure Revolve the nosepiece to Darkness at the periphery Revolving nosepiece not in click-stop position by... -
Page 6: Image Problems
IMAGE PROBLEMS Image moves while focusing Specimen rises from stage Secure the specimen in the surface slide holder Revolving nosepiece is not Revolve the nosepiece to the in the click-stop position click-stop position Insufficient brightness Aperture diaphragm closed Open to the proper setting too far Condenser position too low Position the condenser at...