Installing Qts Using The Cloud Key - QNAP TS-53B Series User Manual

13. Click Next.
The Select the disk configuration screen appears.
14. Select Configure disks later.
For details on configuring disks, see the Storage Manager section of the QTS User Guide.
15. Click Next.
The Enable multimedia functions screen appears.
16. Select No.
Enabling the multimedia functions allows you to install multimedia applications after configuring the
disks in Storage Manager.
For details on enabling multimedia functions on QTS, see the System Administration section of the
QTS User Guide.
17. Click Next.
The Summary screen appears.
18. Review the settings.
19. Click Apply.
A confirmation message appears.
Warning
Clicking Confirm deletes all data on the drive before installing QTS.
20. Click Confirm.
QTS is installed.

Installing QTS Using the Cloud Key

Warning
Installing QTS deletes all data on the drives. Back up your data before proceeding.
1. Power on the NAS.
2. Connect the NAS to the internet.
3. Go to the QNAP Cloud Installation page using one of the following methods:
• On your computer, go to http://install.qnap.com/.
• Scan the QR code on the NAS using a mobile device.
4. Specify the Cloud Key on the NAS.
5. Create an account or log in to myQNAPcloud.
6. Specify the myQNAPcloud name for the NAS.
The myQNAPcloud name is used when remotely accessing the NAS.
7. Optional: Select CloudLink.
CloudLink allows you to remotely access the NAS without having to configure port forwarding on your
router. You can remotely access the NAS by logging into QTS or by using mobile apps.
You can also enable CloudLink by installing the CloudLink app on the NAS.
8. Click Next.
The Smart Installation Guide appears.
TS-x53B User Guide
Installation and Configuration 35