Category
Hardware and peripherals
Tools
Setting Up the NAS
1. Place your NAS device in an environment that meets the requirements.
For details, see
Installation
2. Verify that the intake vents on the bottom of the case are unobstructed.
3. Install the drives.
For details, see
Installing 3.5-inch Hard Drives
4. Connect the power cord and all applicable cables.
5. Power on the NAS.
6. Install QTS.
For details, see
QTS
7. Log on to QTS.
• Storage drives
For details on compatible drives, go to
compatibility/.
• Network cable
• Phillips #1 or #2 screwdriver
• Anti-static wrist strap
Requirements.
Installation.
Item
and
Installing 2.5-inch Hard Drives or Solid State
TS-x53B User Guide
https://www.qnap.com/en/
Drives.
Product Overview
10