Installing Qts Using An Hdmi Connection - QNAP TS-53B Series User Manual

Installing QTS Using an HDMI Connection

Warning
Installing QTS deletes all data on the drives. Back up your data before proceeding.
1. Connect an HDMI monitor and USB keyboard to the NAS.
2. Power on the NAS.
The Welcome screen of the Smart Installation Guide appears.
3. Select Start Smart Installation Guide.
The Enable the multimedia features screen appears.
4. Select No, skip this process.
Enabling the multimedia functions allows you to install multimedia applications after configuring the
disks in Storage Manager.
For details on enabling multimedia functions on QTS, see the System Administration section of the
QTS User Guide.
The Select the disk configuration screen appears.
5. Select Configure later.
For details on configuring disks, see the Storage Manager section of the QTS User Guide.
The first Summary screen appears.
6. Review the settings.
7. Click Next.
The second Summary screen appears.
8. Review the settings.
9. Click Next.
The Confirm screen appears.
Warning
Clicking Confirm deletes all data on the drive before installing QTS.
10. Click Next.
QTS is installed.
TS-x53B User Guide
Installation and Configuration 37