NavLinkz RL4-MZD88 Manual page 15

2.8. Connecting the Video sources
It is possible to connect two after-market Video-sources and one after-market rear-view
camera to the video-interface.
Before the final installation, we recommend a test-run of the interface. Due to changes in
the production of the vehicle manufacturer, there's always the possibility of
incompatibility.
Connect the 12pin interface cable's female 12pin connector to the male 12pin connector of
the video-interface.
Connect the video RCA of the Rear-view camera to the 12pin interface cable's female
RCA connector „Reverse
Connect the front camera's video RCA connector to the 12pin interface cable's female
RCA connector „Front V3".
Connect the video RCA of the AV source 1 and 2 to the 12pin interface cable's female RCA
connector "Left (V1)" and
Version 29.01.2021
V4.
"Right (V2)".
HW: CAM(V100)/(V21) RL4-MZD88