Table of Contents
Advertisement
8.3.1 Adjusting the Angles
The Bullet Camera is designed to be adjustable in three shafts.
Tip: The three shafts are designed to offer easy and flexible ceiling / wall
mount installation.
First Shaft
You can adjust the camera body by 360 degrees to the right or the left.
1.
Unscrew the panning lock screw with the torx wrench.
2.
Adjust the angle of camera body to the right or the left, and fasten the
panning lock screw.
0 ~ 360°
66
Torx Wrench
Panning Lock Screw
Advertisement
Table of Contents
