Table of Contents
Advertisement
8.3.2 Adjusting Lens and Inserting a Memory Card
To adjust the camera's lens to produce a clear image and insert a micro SD
card (SD/SDHC, version 2.0 only, Class 10) into the memory card slot,
follow the steps below.
1.
Loosen the camera's cover. For GV-BL2510-E / 5310-E, loosen the
camera's cover and the screw as indicated below.
2.
To adjust for image clarity, follow the steps below.
•
For models with zoom and focus screws, pull out the camera
and remove the silica gel bag to access its focus and zoom screws.
Use GV-IP Device Utility to help you. For details, see 22.3
Adjusting Image Clarity in the Quick Start Guide.
•
For motorized varifocal lens models, adjust for image clarity
through the Web interface. For details, see Zoom, Focus Change,
and Focus Mode settings, The Control Panel of the Live View
Window, Accessing the Camera Chapter, GV-IPCAM Firmware
Manual on Software DVD.
8
Camera's Cover
Bullet Camera (Part I)
Zoom Screw
Focus Screw
69
Advertisement
Table of Contents
