Table of Contents
Advertisement
2.4 Connecting the Camera
1.
Connect power using one of the following methods:
•
Plug the power adapter to the 5V terminal block.
•
Use the Power over Ethernet (PoE) function and the power will be
provided over the network cable.
The power and status LEDs shall turn on (green).
2.
Use a standard network cable to connect the camera to your network.
3.
Optionally connect a speaker.
4.
Insert a micro SD card (SD/SDHC, version 2.0 only, Class 10).
5.
You are ready to access the live view, adjust the image clarity and
configure the basics. See 24. Accessing the Camera in the Quick Start
Guide.
3
2
Ultra Box Camera
1
2
13
Advertisement
Table of Contents
