Switching On/Off The Projector; Connecting The Power Cord; Power Indicator - Panasonic PT-VW540 Operating Instructions Manual

Switching on/off the projector

Connecting the power cord

Make sure that the supplied power cord is securely fixed to the projector body to prevent it from being removed
easily.
Use the power cord matching with the power supply voltage and the shape of the outlet.
For details of power cord handling, refer to "Read this first!". (
Attaching the power cord
1) Check the shapes of the <AC IN> terminal on the back of the projector body and the power cord
connector and insert the plug completely in the correct direction (until you hear the side tabs click in
place).
Removing the power cord
1) Confirm that the projector is in standby mode, and remove the power plug from the outlet.
2) Remove the power cord connector from the <AC IN> terminal of the projector body while pressing the
side tabs.

Power indicator

Displays the status of the power. Check the <ON(G)/STANDBY(R)> status of the power indicator before operating
the projector.
Power indicator <ON(G)/STANDBY(R)>
38 - ENGLISH
Chapter 3 Basic Operations - Switching on/off the projector
Æ
page 4)