[Noise Reduction]; [Tv-System]; [Rgb/Yc ] / [Rgb/Yp ] - Panasonic PT-VW540 Operating Instructions Manual
Commercial use
Hide thumbs
Also See for PT-VW540:
- Operating instructions (functional manual) (131 pages) ,
- Operating instructions manual (134 pages)
Table of Contents
Advertisement
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
[NOISE REDUCTION]
(Only for VIDEO signal input)
You can reduce noises when the input image is degraded and noise is occurring in the image signal.
1)
Press as to select [NOISE REDUCTION].
2)
Press qw or the <ENTER> button.
f The [NOISE REDUCTION] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[ON]
Attention
f When this is set for an input signal with less noise, the image may look different from what it originally was. In such a case, set it to [OFF].
[TV-SYSTEM]
(Only for VIDEO signal input)
The projector will automatically detect the input signal, but you can set the color system manually when an
unstable signal is input. Set the color system matching the input signal.
1)
Press as to select [TV-SYSTEM].
2)
Press qw or the <ENTER> button.
f The [TV-SYSTEM] individual adjustment screen is displayed.
3)
Press qw to switch the item.
f The items will switch each time you press the button.
f Select among [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [PAL60] and [SECAM].
f Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M],
[PAL-N], [SECAM], or [PAL60].)
[RGB/YC
C
] / [RGB/YP
B
R
The projector will automatically detect the input signal, but you can set the system format manually when an
unstable signal is input. Set the system format matching the input signal.
1)
Press as to select [RGB/YC
2)
Press qw or the <ENTER> button.
f The [RGB/YC
C
] or [RGB/YP
B
R
3)
Press qw to switch the item.
f The items will switch each time you press the button.
f Normally it is set to [AUTO]. If it cannot project properly with [AUTO], set it to [RGB], [YC
according to the input signal.
Terminal
<COMPUTER 1 IN> terminal /
<COMPUTER 2 IN/1 OUT> terminal
<HDMI 1 IN> terminal /
<HDMI 2 IN> terminal
60 - ENGLISH
Chapter 4 Settings - [PICTURE] menu
Performs no cinema processing.
Performs cinema processing.
No correction.
Reduces noises.
P
]
B
R
C
] or [RGB/YP
P
B
R
B
R
P
] individual adjustment screen is displayed.
B
R
480/60i, 576/50i, 480/60p, 576/50p
Other movie-based image signals
480/60i, 576/50i, 480/60p, 576/50p
Other image signals
].
System format
Select [AUTO], [RGB] or [YC
Select [AUTO], [RGB] or [YP
Select [AUTO], [RGB] or [YC
Select [AUTO], [RGB] or [YP
C
] or [YP
P
]
B
R
B
R
C
]
B
R
P
]
B
R
C
]
B
R
P
]
B
R
Advertisement
Table of Contents
