Table of Contents
Advertisement
Stratford Fireplace Installation and Operation Manual
Flip the fireplace's lower decorative
louver. Install the blocking plate (F)
included in the kit, on the front
opening of the air control housing.
Using a screwdriver, secure with
two screws.
Then, install the flexible pipe* (D)
(not supplied) to the fresh air intake
adapter (B) using one of the
adjustable pipe clamps (C). Secure
the other end of the pipe to the
outside wall termination (E) using
the second adjustable pipe clamp
(C). The outside wall termination (E)
must be installed outside of the
building.
*Use the length required for your
installation while respecting the
maximum length of 30 ft (9 m). To
avoid
condensation,
it
is
recommended to use an insulated
pipe long enough and containing a
"P-Trap" loop. This configuration
can be found inside the chase, but
must
at
all
times
maintain
clearances to combustibles.
84 _____________________________________________________________________
Advertisement
Table of Contents
