Table of Contents
Advertisement
Stratford Fireplace Installation and Operation Manual
The duct system must be installed respecting the following:
1. It is recommended to wear gloves to perform this procedure. Remove the plates closing up the
8" dia. holes on top of the fireplace. Then, cut and remove the insulation in order to obtain
two 8" dia. openings. Then, remove the plates closing up the 8" dia. holes inside the fireplace.
2. Secure the 6 steel brackets (B) with 6 screws provided (C) on top of the fireplace (3 for each
ducting). Insert the ducting (A) (not provided) into each opening and secure it in place using
the steel brackets (B) installed previously with 6 other self-tapping screws provided (C).
_____________________________________________________________________ 69
Advertisement
Table of Contents
