5.2
Driver Installation
The system comes with a "Drivers & Utilities" DVD that offers "one-click" driver
installation process. It automatically detects your Windows operating system and
installs all necessary drivers for you system with a single click.
5.2.1
Install Drivers Automatically
To install drivers automatically, please refer to the following procedures.
1.
Insert the "Drivers & Utilities" DVD into a USB DVD-drive connect to your
system. A setup utility launches and the following dialog appears.
Click on "Automatic Driver Installation" and the setup utility will automatically
2.
detect your Windows operating system and install all necessary drivers. The
installation process takes about 6~8 minutes depending on your Windows
version. Once driver installation is done, the setup utility reboots your Windows
and you may begin using your system.
5.2.2
Install Drivers Manually
You can also manually install each driver for the system. Please note when installing
drivers manually, you need to install the drivers in the following sequence mentioned
below.
Windows 10 (x64)
The recommended driver installation sequence is
1.
Chipset driver (x:\Driver_Pool\Chipset_10_APL\Win_ALL\SetupChipset.exe)
2.
Graphics driver
(x:\Driver_Pool\Graphics_SKL_APL\Win_7_8_10_APL_64\Setup.exe)
3.
Audio driver (x:\Driver_Pool\Audio_ALC262\Win_ALL_64\Setup.exe)
4.
LAN driver
(x:\Driver_Pool\GbE_I210_I350\Win_ALL_64\APPS\PROSETDX\Winx64\DxS
etup.exe)
TXE driver (x:\Driver_Pool\TXE_APL\Win_10_64\SetupTXE.exe)
5.
75